Lesotho MOHSW Installation

This page contains installation instructions on installing iHRIS Lesotho Customizations

For other versions, see Linux (Ubuntu) Installation (versions) .

Warning: See Installing iHRIS on Ubuntu 10.4 (Lucid) after completing these instructions to get iHRIS working on the latest release of Ubuntu.

Need help? Try our Project Communication

Getting Ready

Here are instructions for installing the iHRIS Suite on an Linux (Ubuntu) system. If you need help installing Ubuntu you may want to take a look at these directions for installing a Server or a Desktop system.

Note: Unless specifically mentioned, all the commands below are run using a terminal. You can start this in Ubuntu by going to Applications -> Accessories -> Terminal. Any time a command begins with sudo it will prompt for your password because this will be run with administrative privileges. When you run sudo multiple times, only the first time will ask for your password.

Note: Some installation commands will prompt for inputs in the terminal window, usually with a blue background. The mouse doesn't work to click on options here. You can use Tab to move between options and the space bar to check or uncheck selections.

Note: Some commands will launch the gedit file editor. Look at the documentation if you need additional help.

We begin by install a Lamp server (You can find more help here): <source lang="bash"> sudo tasksel install lamp-server </source> If you have never used mysql on your system, you will be asked to set the 'root' password for mysql. We will refer to this password as XXXXX below.

Important: Make sure your email system is correctly configured. Under a default Ubuntu installation, you can do this with one of two commands: <source lang="bash"> sudo apt-get install postfix sudo dpkg-reconfigure postfix </source>

Follow the on-screen instructions to set up email on your system. For additional help with installing Postfix, look at these instructions. On Debian systems, the same commands can be used, but exim4 is the default MTA instead of postfix

If you are using another Linux distribution, make sure your system can send email properly before continuing.

Configuring MYSQL

Make sure you have in /etc/mysql/my.cnf the following values set: <source lang="bash"> sudo gedit /etc/mysql/my.cnf </source> <source lang="ini"> query_cache_limit = 4M query_cache_size = 64M </source> It appears that they were reduced with Karmic

Configuring PHP

Next, you'll need to increase the memory limit for PHP. You can do this by editing the /etc/php5/apache2/php.ini. <source lang="bash"> sudo gedit /etc/php5/apache2/php.ini </source>

Change the following line: <source lang="ini"> memory_limit = 32M </source> to: <source lang="ini"> memory_limit = 128M </source>

Installing Pear and PECL Packages

We need to install a few Pear and PECL packages for PHP. For the Pear packages you can do: <source lang="bash"> sudo apt-get install php-pear php-apc php-mdb2 php-mdb2-driver-mysql sudo pear install text_password console_getopt </source>

During certain activities like installation and upgrades you may need more memory than APC uses by default. The php-apc package should have installed a file in /etc/php5/conf.d/apc.ini. Edit this file:

<source lang="bash"> sudo gedit /etc/php5/conf.d/apc.ini </source>

Then add the following lines:

<source lang="ini"> apc.shm_size=100 apc.slam_defense = Off </source> See slam defense and this.

You'll need to restart Apache after making this change. <source lang="bash"> sudo /etc/init.d/apache2 restart </source>

There are two optional packages you may wish to install: <source lang="bash"> sudo apt-get install php5-gd php5-tidy </source> which are used to for inserting images into PDF output of reports and for exporting XML files in a nicely formatted manner

FileInfo

Note: If you're running Ubuntu 10.4 (Lucid Lynx) then you do not need to install Fileinfo.

The pecl package FileInfo is used to verify the validity of file types used for uploading (e.g. for uploaded images or documents) <source lang="bash"> sudo apt-get install libmagic-dev php5-dev sudo pecl install Fileinfo </source> If this doesn't work, you can also try: <source lang="bash"> sudo pear install pecl/Fileinfo echo extension=fileinfo.so | sudo tee /etc/php5/apache2/conf.d/fileinfo.ini </source>

Configuring Apache Web Server

You will see later we are using the apache rewrite module. To enable the module: <source lang="bash"> sudo a2enmod rewrite </source> Now we need to make sure we can use the .htaccess file. <source lang="bash"> sudo gedit /etc/apache2/sites-available/default </source> Change: <source lang="apache"> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </source> to: <source lang="apache"> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </source> Save and quit.

Let us restart the Apache webserver using: <source lang="bash"> sudo /etc/init.d/apache2 restart </source>

Ubunutu 10.4 Lucid

If you are using Lucid 10.4 Ubuntu, make sure that you following these important instructions

Downloading the Main iHRIS Manage Software

To download the software you enter these commands: <source lang="bash"> sudo mkdir -p /var/lib/iHRIS/lib/4.0.7 cd /var/lib/iHRIS/lib/4.0.7 sudo wget http://launchpad.net/ihris-manage/4.0/4.0.6/+download/ihris-manage-full-4_0_7.tar.bz2 sudo tar -xjf ihris-manage-full-4_0_7.tar.bz2 </source>

Downloading the Lesotho Customizations of iHRIS Manage

To download the software you enter these commands: <source lang="bash"> sudo apt-get install bzr sudo mkdir -p /var/lib/iHRIS/lesotho sudo chown `whoami`:`whoami` /var/lib/iHRIS/lesotho cd /var/lib/iHRIS/lesotho bzr branch lp:ihris-manage-lesotho 4.0 cd /var/lib/iHRIS/lesotho/4.0 bzr bind lp:ihris-manage-lesotho </source>

MOHSW Site

Database Setup

To create the needed database you can do: <source lang="bash"> mysql -u root -p </source> Enter the password you set above (XXXXX) for MySQL. You will now be able to send commands to MySQL and the prompt should always begin with 'mysql> '. Type these commands: <source lang="mysql"> CREATE DATABASE manage_lesotho_mohsw_4_0; GRANT ALL PRIVILEGES ON manage_lesotho_mohsw_4_0.* TO ihris@localhost identified by 'PASS'; SET GLOBAL log_bin_trust_function_creators = 1; exit </source> Substitute PASS with something appropriate. We'll refer to this password as YYYYY.

If you are having trouble creating routines see this. For security, make sure the password you choose is different than the root password for MySQL. Let us refer to this password as YYYYY.

Setting the Password

Now we need to set the password PASS in the main configuration file. Run the commands: <source lang="bash"> mkdir -p /var/lib/iHRIS/lesotho/4.0/sites/MOHSW/pages/local/ cp /var/lib/iHRIS/lesotho/4.0/sites/MOHSW/pages/config.values.php /var/lib/iHRIS/lesotho/4.0/sites/MOHSW/pages/local/config.values.php gedit /var/lib/iHRIS/lesotho/4.0/sites/MOHSW/pages/local/config.values.php </source> and change: <source lang="php"> /**

* the dsn to connect to your databse
*/

$i2ce_site_dsn = 'mysql://ihris:MYSQLPASSWORD@localhost/manage_lesotho_mohsw_4_0' ; </source> to: <source lang="php"> /**

* the dsn to connect to your databse
*/

$i2ce_site_dsn = 'mysql://ihris:PASS@localhost/manage_lesotho_mohsw_4_0' ; </source> Save and Quit. Here PASS is what you chose above.

Making the Site Available

We make iHRIS Manage site available via the webserver: <source lang="bash"> sudo ln -s /var/lib/iHRIS/lesotho/4.0/sites/MOHSW/pages /var/www/ihris-MOHSW </source>

Finishing Up

Now we are ready to begin the site installation. Simply browse to:

http://localhost/ihris-MOHSW

and wait for the site to initalize itself. Congratulations! You may log in as the i2ce_admin with the password you used to connect to the database (YYYY that you set above).

CHAL Site

Database Setup

To create the needed database you can do: <source lang="bash"> mysql -u root -p </source> Enter the password you set above (XXXXX) for MySQL. You will now be able to send commands to MySQL and the prompt should always begin with 'mysql> '. Type these commands: <source lang="mysql"> CREATE DATABASE manage_lesotho_chal_4_0; GRANT ALL PRIVILEGES ON manage_lesotho_chal_4_0.* TO ihris@localhost identified by 'PASS'; SET GLOBAL log_bin_trust_function_creators = 1; exit </source> Substitute PASS with something appropriate. We'll refer to this password as YYYYY.

In version 4.0.1 of iHRIS we create mysql functions. If you are having trouble creating routines see this. For security, make sure the password you choose is different than the root password for MySQL. Let us refer to this password as YYYYY.

Setting the Password

Now we need to set the password PASS in the main configuration file. Run the commands: <source lang="bash"> mkdir -p /var/lib/iHRIS/lesotho/4.0/sites/CHAL/pages/local/ cp /var/lib/iHRIS/lesotho/4.0/sites/CHAL/pages/config.values.php /var/lib/iHRIS/lesotho/4.0/sites/CHAL/pages/local/config.values.php gedit /var/lib/iHRIS/lesotho/4.0/sites/CHAL/pages/local/config.values.php </source> and change: <source lang="php"> /**

* the dsn to connect to your databse
*/

$i2ce_site_dsn = 'mysql://ihris:MYSQLPASSWORD@localhost/manage_lesotho_chal_4_0' ; </source> to: <source lang="php"> /**

* the dsn to connect to your databse
*/

$i2ce_site_dsn = 'mysql://ihris:PASS@localhost/manage_lesotho_chal_4_0' ; </source> Save and Quit. Here PASS is what you chose above.

Making the Site Available

We make iHRIS Manage site available via the webserver: <source lang="bash"> sudo ln -s /var/lib/iHRIS/lesotho/4.0/sites/CHAL/pages /var/www/ihris-CHAL </source>

Finishing Up

Now we are ready to begin the site installation. Simply browse to:

http://localhost/ihris-CHAL

and wait for the site to initalize itself. Congratulations! You may log in as the i2ce_admin with the password you used to connect to the database (YYYY that you set above).

Updating Customizations

To update the customizations from launchpad, ensure that port 22 is open on the server and do:

cd /var/lib/iHRIS/lesotho/4.0
bzr update

Importing Data

Importing Data for MoHSW

First thing we will do is to make sure the Lesotho customizations are up to date. You can do this (as indicated above) by:

cd /var/lib/iHRIS/lesotho/4.0
bzr update

Once you are done you can enter

bzr revno

to check the revision number of the customizations. It should be (at least) 34.

You need to save the cleaned data from Rosaline for the MOHSW on the desktop under the filename lesotho_cleaned.csv

To import the data:

cd /var/lib/iHRIS/lesotho/4.0/tools
php import_clean.php

• It will ask you if you want to run in test mode. You can answer N.
• It will ask you if the first column of the lesotho_cleaned.csv file is a comment. You can answer N
• You can expect the script to take about an hour to run. You need to keep an eye on it as it will ask you occasionally if you wish to create some missing standardized data such as sub-programme.

VERY IMPORTANT: Once the data has been imported you need to clear the webserver's cache. To do so browse to:

http://localhost/ihris-MOHSW/clear_cache.php

Once the data has been imported, it will create a new file on the desktop lesotho_cleaned.bad.DATE_TIME.csv which will contain a list of all the records it had problems with.

Importing Data for CHAL

First thing we will do is to make sure the Lesotho customizations are up to date. You can do this (as indicated above) by:

cd /var/lib/iHRIS/lesotho/4.0
bzr update

Once you are done you can enter

bzr revno

to check the revision number of the customizations. It should be (at least) 38. Since you have updated the code, you will need to browse to:

http://localhost/ihris-CHAL

in order to do a site update.

You need to save the cleaned data from Rosaline for the MOHSW on the desktop under the filename lesotho_cleaned_CHAL.csv

To import the data:

cd /var/lib/iHRIS/lesotho/4.0/tools
php import_CHAL.php

• It will ask you if you want to run in test mode. You can answer N.
• It will ask you if the first column of the lesotho_cleaned_CHAL.csv file is a comment. You can answer N
• You can expect the script to take about an hour to run. You need to keep an eye on it as it will ask you occasionally if you wish to create some missing standardized data such as sub-programme.

VERY IMPORTANT: Once the data has been imported you need to clear the webserver's cache. To do so browse to:

http://localhost/ihris-CHAL/clear_cache.php

Once the data has been imported, it will create a new file on the desktop lesotho_cleaned_CHAL.bad.DATE_TIME.csv which will contain a list of all the records it had problems with.