OIM authentication with OHIM

From IHRIS Wiki

Introduction

To secure Openinfoman,OpenHIM should be installed on the server that Openinfoman is running and then create channels inside OpenHIM as described below


Install OpenHIM and configure Openinfoman channels by following below steps

  1. To install OpenHIM,run below commands <source lang="bash"> $ sudo add-apt-repository ppa:openhie/release $ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv EA312927 $ sudo echo 'deb http://repo.mongodb.org/apt/ubuntu trusty/mongodb-org/3.2 multiverse' | sudo tee /etc/apt/sources.list.d/mongodb-org-3.2.list $ sudo apt-get update $ sudo apt-get install openhim-core-js openhim-console </source> For detailed instructions,you may refer to http://openhim.readthedocs.io/en/latest/getting-started.html
  2. Open OpenHIM and create one client to be used with OpenInfoMan to access the channel which will be created in the next step. The link to create client can be found on the left side of OpenHIM.Fill below important fields
    • Client ID
    • Client Name
    • Basic Auth Password